Transmission mount constructed of 1/8 inch mild steel bar stock. It will be signifigantly re-enforced with orthoganal sections of 1/8 inch stock welded on both sides. This unit will bot to the inside of the transmission tunnel, which will be re-enforced with 14ga mild steel.

Crossmember braces constructed from 1/8 inch mild steel bar stock and angle stock. Motor mount towers constructed from 1/4 inch bar stock. The braces will be welded to the crossmember and will bolt to the strut rod mount (the humped thing).

<Back to 240z.jeromio.com< <Back to Motorswap start< >On to the next page>

All images Copyright 2000, 2001, Jeremy Roth, All rights reserved.